What the Death Master File is
42 U.S.C. 1306c; 15 CFR part 1110; Form W-9 (Rev. March 2024)
A hit is a lead, not proof. The public file does not contain protected state death records, and NTIS reminds users to investigate and verify a listed death before taking any adverse action.
The statute defines it. “For purposes of this section, the term "Death Master File" means information on the name, social security account number, date of birth, and date of death of deceased individuals maintained by the Commissioner of Social Security, other than information that was provided to such Commissioner under section 405(r) of this title.” That is section 203 of the Bipartisan Budget Act of 2013, codified at 42 U.S.C. 1306c.
The Social Security Administration keeps the records, and a different agency hands them out. An NTIS notice describes the arrangement: “NTIS receives Death Master File (DMF) data from the Social Security Administration (SSA).” It also says where the reports come from: “SSA receives death reports from various sources, including family members, funeral homes, hospitals, and financial institutions.”
NTIS gives the size on its subscriber site: the file “contains over 83 million records of deaths that have been reported to SSA”. The same page carries the caveat every user should read first: “The SSA does not have a death record for all persons; therefore, SSA does not guarantee the veracity of the file.”
The Commerce Department rule at 15 CFR part 1110 splits the file into two products:
| Product | What it holds | Who may get it |
|---|---|---|
| Limited Access DMF | Records for any deceased individual during the three-calendar-year period beginning on the date of death | Certified Persons only |
| Open Access DMF | Records that do not fall within that three-year period | Anyone. Certification is not required |
The three-calendar-year rule and certification
The restriction is in the statute: “The Secretary of Commerce shall not disclose to any person information contained on the Death Master File with respect to any deceased individual at any time during the 3-calendar-year period beginning on the date of the individual's death, unless such person is certified under the program established under subsection (b).”
For a payer, the recent records are the ones that matter. A payee who died five years ago should already be off your vendor file. The one who died last spring is the risk, and that record is in the Limited Access file.
To be certified, a person must certify that access is appropriate on one of two grounds. The rule requires that the person “has a legitimate fraud prevention interest, or has a legitimate business purpose pursuant to a law, governmental rule, regulation, or fiduciary duty, and shall specify the basis for so certifying”. The person must also have systems, facilities and procedures in place to safeguard the information, and must agree to audits by NTIS.
The process runs through NTIS. Its page states: “The certification program established under the final rule limits access to LADMF information to those persons certified under the program.” The rule requires a written attestation from an Accredited Conformity Assessment Body that the safeguards are in place. NTIS charges processing fees, and its page adds: “Certification must be renewed each year.” The attestation is renewed every three years. NTIS publishes a list of Certified Persons.
The paperwork has two parts:
- The subscriber certification, Form NTIS FM161. The applicant checks the basis it relies on (a fraud prevention interest, or a business purpose under a named law, rule, regulation or fiduciary duty) and says whether it will pass Limited Access information to anyone else. It consents to audits, and the form says approval “will expire one year thereafter on the expiration date indicated in the same email”.
- The safeguards attestation, Form NTIS FM100A. An Accredited Conformity Assessment Body completes it after assessing the applicant’s systems, and sends it in itself: “NTIS will not accept Form NTIS FM100A directly from an applicant.” The assessment must be “no more than 3 years prior to the date of the applicant”’s certification form. State and local government agencies that rely on their own auditors use Form NTIS FM100B.
Misuse is penalized. A person who discloses or uses Limited Access information outside the rule “shall pay to the General Fund of the United States Department of the Treasury a penalty of $1,000 for each such disclosure or use”. The total for a calendar year is capped at $250,000 unless the violation is willful or intentional.
How NTIS delivers the file
A Certified Person can get the data two ways, and the choice decides how current its check is.
| Route | What you get | What you have to do |
|---|---|---|
| Search products at ladmf.ntis.gov | Lookups against the file NTIS maintains: one Social Security number at a time, batches, or searches built into your own system | Nothing to maintain. NTIS says: “The LADMF is updated on a weekly basis.” |
| The file itself, from dmf.ntis.gov | A full file, then weekly or monthly update files of new deaths, changes and deletions | Apply every update, in order. NTIS makes this a condition of use |
That condition is strict. A subscriber that takes the full file must “keep that file updated by purchasing a subscription to the SSA DMF Monthly or Weekly Updates”. A copy that is not updated carries deaths that SSA has since corrected, and misses the ones reported after the copy was made.
Each record is 100 characters: Social Security number, last name, suffix, first name, middle name, a code showing whether the death was verified or proof was seen, date of death and date of birth. The residence and ZIP code fields were dropped in 2011, in NTIS’s words “as a result of no longer publishing protected state records”.
This matters to a payer that buys the check from a provider. Ask whether the provider searches the NTIS file directly or keeps its own copy, and if it keeps a copy, how often it applies the updates.
Getting the check through a screening provider
Most payers do not subscribe to the raw file. They use a provider that is a Certified Person and runs the comparison for them. The rule limits what a Certified Person may pass on. It may disclose a deceased individual’s Limited Access record only to a person who meets the certification requirements for purpose and safeguards, and the penalty section reaches the recipient as well: it applies to any person to whom the information is disclosed, “whether or not such Person is certified under this part”, who further discloses or uses it outside the rule.
So ask a provider three questions before you rely on its death check:
- Is it a Certified Person? NTIS posts a list, but the posted list is headed “Certified Persons as of January 18, 2019”, so a provider certified since then may not be on it. Ask for its current certification approval.
- Does its check cover the Limited Access file, or only older records?
- What does its agreement require of you, as the party receiving results, on purpose and safeguards?
The rule draws one line that helps payers. Death information you hold from another source is outside it. The definition of the Limited Access DMF excludes a name, number, date of birth or date of death in a person’s possession “but obtained by such Person through a source independent of the Limited Access DMF”. A death certificate from the family, or a letter from an executor, is your own record.
What the file does and does not contain
The public file is not a complete list of deaths. The statutory definition leaves out the death information that states provide to SSA under section 205(r) of the Social Security Act. NTIS published SSA’s explanation of what that meant in practice: “Effective November 1, 2011, the DMF data that NTIS receives from SSA no longer contains protected state death records.” The notice continues: “Section 205(r) of the [Social Security] Act prohibits SSA from disclosing the state death records SSA receives through its contracts with the states, except in limited circumstances.”
The same notice gives the size of the change. The historical public file held 89 million records. SSA removed about 4.2 million of them and adds about 1 million fewer records each year than before.
Two consequences for a payer:
- No hit does not mean the payee is alive. A death reported to SSA only through a state record is not in the file NTIS distributes.
- A hit does not mean the payee is dead. The notice ends with this instruction: “DMF users should always investigate and verify the death listed before taking any adverse action against any individual.” A match on a Social Security number with a different name or date of birth needs a second look before you stop a payment.
Wrong records do get in, and NTIS tells subscribers how they are fixed. It cannot change the data. “Corrections must be made at the local Social Security office serving the individual.” That office corrects SSA’s record and gives the person a verification document. If a payee shows you one, or other proof that they are alive, NTIS’s instruction to subscribers is plain: “You should accept proof from the individual”. Release the hold, keep a copy of the proof, and tell your provider so its copy is corrected.
The file holds four data elements about individuals. It has no EINs, so it does not screen a corporation or a partnership. It is useful for individual payees, sole proprietors, and the people behind single-owner businesses that gave you an SSN.
Why a payer checks payees against it
Payments after death. Royalties, rents, annuities, pensions and other recurring payments often keep going to a payee who has died, because nobody told the payer. Money paid after death belongs to the estate or the heirs, not the person in your vendor file.
The W-9 is no longer good. A W-9 certifies one person’s name and TIN. The form itself uses a death as its example of a change that requires a new one: “In addition, you must furnish a new Form W-9 if the name or TIN changes for the account, for example, if the grantor of a grantor trust dies.” After a death, the payee is an estate with its own EIN, or a beneficiary with their own SSN. See W-9s for trusts, estates and deceased payees and does a W-9 expire.
The 1099 would be wrong. A return that reports a full year of payments under a decedent’s name and SSN reports income to the wrong taxpayer for the part paid after death.
Fraud. A Social Security number that belongs to a person who has died, offered by a new vendor, is a reason to stop and ask questions. Fraud prevention is one of the two grounds on which a person can be certified for access.
What to do with a confirmed death:
- Hold further payments until you know who is entitled to them.
- Report payments made before death under the individual’s name and SSN.
- Get a new Form W-9 from the estate or the beneficiaries for payments made after death.
- Keep what you relied on: the source of the death information and the date you confirmed it.
A death check is one part of knowing your payees. For the others, see how to verify a tax ID number, how to verify a vendor exists and vendor sanctions screening.
Questions people ask
What is the Death Master File?
It is information on the name, Social Security number, date of birth and date of death of deceased individuals maintained by the Commissioner of Social Security, not including death information that states provide to SSA. NTIS, part of the Commerce Department, distributes it.
Who can access the Death Master File?
Records for deaths within the last three calendar years are in the Limited Access Death Master File, which only persons certified by NTIS may receive. Certification is not required for the Open Access file, which leaves those recent records out.
What is the three-year rule for the Death Master File?
The Secretary of Commerce may not disclose Death Master File information about a deceased individual during the three-calendar-year period beginning on the date of death, unless the person receiving it is certified under the NTIS program.
Is the Death Master File complete?
No. Since November 1, 2011, the data NTIS receives from SSA has not contained protected state death records. A payee who has died may not appear in it.
What should a payer do when a payee appears on the Death Master File?
Verify the death before acting. NTIS reminds users to investigate and verify the death listed before taking any adverse action. Once it is confirmed, hold further payments and get a new Form W-9 from the estate or the beneficiaries.
How often is the Death Master File updated?
NTIS says the Limited Access file behind its search products is updated on a weekly basis with data supplied by the Social Security Administration. Subscribers who hold their own copy receive weekly or monthly update files and must apply every one.
How does someone get removed from the Death Master File by mistake?
NTIS cannot change the data. The person goes to their local Social Security office with proof, the office corrects the record and gives them a verification document, and a payer shown that proof should accept it.
Is a W-9 still valid after the payee dies?
No. Form W-9 says a new one must be furnished if the name or TIN changes for the account, and gives the death of the grantor of a grantor trust as its example. Payments made after death belong to the estate or the heirs.