All 30 box 7a codes
Each entry gives the code, the definition, the explanation and the “Used with code (if applicable)” column, in the words of Table 1 of the 2026 instructions. Where an explanation says “earlier”, it points to a section of those instructions. Typing a single character shows that code only.
No code matches. Try a single code (such as 7 or G) or one word (such as rollover, death, Roth, excess or loan).
Use code 1 only if the participant has not reached age 59½, and you do not know if any of the exceptions under code 2, 3, or 4 apply.
However, use code 1 even if the distribution is made for medical expenses, health insurance premiums, qualified higher education expenses, a first-time home purchase, a qualified reservist distribution, a qualified birth or adoption distribution, an emergency personal expense distribution, an eligible distribution to a domestic abuse victim, a terminally ill individual distribution, a qualified disaster recovery distribution, or a qualified long-term care distribution under section 72(t)(2)(B), (D), (E), (F), (G), (H), (I), (K), (L), (M), or (N).
Code 1 must also be used even if a taxpayer is age 59½ or older and they modify a series of substantially equal periodic payments under section 72(q), (t), or (v) prior to the end of the 5-year period that began with the first payment.
Use code 2 only if the participant has not reached age 59½ and you know the distribution is any of the following.
- A Roth IRA conversion (an IRA converted to a Roth IRA).
- A distribution made from a qualified retirement plan or IRA because of an IRS levy under section 6331.
- A governmental section 457(b) plan distribution that is not subject to the additional 10% tax. But see Governmental section 457(b) plans, earlier, for information on distributions that may be subject to the 10% additional tax.
- A distribution from a qualified retirement plan after separation from service in or after the year the participant has reached age 55.
- A distribution from a governmental plan to a public safety employee (as defined in section 72(t)(10)(B)) after separation from service, in or after the year the employee has reached age 50 or 25 years of service under the plan, whichever is earlier. A distribution from a qualified plan, a section 403(a) plan, or a section 403(b) plan to an employee who provides firefighting services, after separation from service, in or after the year the employee has reached age 50 or 25 years of service under the plan, whichever is earlier.
- A distribution that is part of a series of substantially equal periodic payments, as described in section 72(q), (t), (u), or (v).
- A distribution that is a permissible withdrawal under an eligible automatic contribution arrangement (EACA).
- Any other distribution subject to an exception under section 72(q), (t), (u), or (v) that is not required to be reported using code 1, 3, or 4.
- An employer-matching or nonelective contribution made to a Roth SEP IRA or a Roth SIMPLE IRA.
For these purposes, see section 72(m)(7) and Rev. Rul. 85-105, 1985-2 C.B. 53.
Used with: D
Use code 4 regardless of the age of the participant to indicate payment to a decedent's beneficiary, including an estate or trust.
Also use it for death benefit payments made by an employer but not made as part of a pension, profit-sharing, or retirement plan.
Also use it for payments of reportable death benefits.
Use code 5 if there was a prohibited transaction involving the IRA account. Code 5 means the account is no longer an IRA.
Used with: None (the table lists no second code)
Use code 6 to indicate the tax-free exchange of life insurance, annuity, long-term care insurance, or endowment contracts under section 1035.
Used with: W
Use code 7: (a) for a normal distribution from a plan, including a traditional IRA, section 401(k), or section 403(b) plan, if the employee/taxpayer is at least age 59½; (b) for a Roth IRA conversion if the participant is at least age 59½; and (c) to report a distribution from a life insurance, annuity, or endowment contract and for reporting income from a failed life insurance contract under section 7702(g) and (h).
See Rev. Proc. 2008-42, 2008-29 I.R.B. 160, available at IRS.gov/irb/2008-29_IRB#RP-2008-42.
Generally, use code 7 if no other code applies. Do not use code 7 for a Roth IRA.
Note: Code 1 must be used even if a taxpayer is age 59½ or older and they modify a series of substantially equal periodic payments under section 72(q), (t), or (v) prior to the end of the 5-year period that began with the first payment.
Use code 8 for a corrective IRA distribution under section 408(d)(4), unless code P applies.
Also use this code for corrective distributions of excess deferrals, excess contributions, and excess aggregate contributions, unless code P applies.
See Corrective Distributions, earlier, and IRA Revocation or Account Closure, earlier, for more information.
For a Trump account, use this code for a distribution of excess contributions (which should include earnings or losses).
Use code 9 to report premiums paid by a trustee or custodian for current life or other insurance protection. See the instructions for box 2a, earlier, for more information.
Used with: None (the table lists no second code)
Use code A only for participants born before January 2, 1936, or their beneficiaries to indicate the distribution may be eligible for the 10-year tax option method of computing the tax on lump-sum distributions (on Form 4972, Tax on Lump-Sum Distributions).
To determine whether the distribution may be eligible for the tax option, you need not consider whether the recipient used this method (or capital gain treatment) in the past.
Use code C for a distribution to report payments of reportable death benefits.
Used with: D
See Distributions Under Employee Plans Compliance Resolution System (EPCRS), earlier.
Used with: None (the table lists no second code)
See Charitable gift annuities, earlier.
Used with: None (the table lists no second code)
Use code G for a direct rollover from a qualified plan, a section 403(b) plan, or a governmental section 457(b) plan to an eligible retirement plan (another qualified plan, a section 403(b) plan, a governmental section 457(b) plan, or an IRA). See Direct Rollovers, earlier.
Also use code G for a direct payment from an IRA to an accepting employer plan, for IRRs that are direct rollovers, and to report designated Roth nonelective contributions and designated Roth matching contributions for the year in which the contributions are allocated.
Note: Do not use code G for a direct rollover from a designated Roth account to a Roth IRA. Use code H.
Use code H for a direct rollover of a distribution from a designated Roth account to a Roth IRA.
Used with: 4
Use code K to report distributions of IRA assets not having a readily available FMV. These assets may include:
- Stock, other ownership interest in a corporation, short- or long-term debt obligations, not readily tradable on an established securities market;
- Ownership interest in a limited liability company (LLC), partnership, trust, or similar entity (unless the interest is traded on an established securities market);
- Real estate;
- Option contracts or similar products not offered for trade on an established option exchange; or
- Other asset that does not have a readily available FMV.
Use code N for a recharacterization of an IRA contribution made for 2026 and recharacterized in 2026 to another type of IRA by a trustee-to-trustee transfer or with the same trustee.
Used with: None (the table lists no second code)
See the explanation for code 8.
The IRS suggests that anyone using code P for the refund of an IRA contribution under section 408(d)(4), including excess Roth IRA contributions, advise payees, at the time the distribution is made, that the earnings are taxable in the year in which the contributions were made.
Note: A participant is allowed to take out a prior-year excess contribution when the IRS provides tax relief by postponing the tax filing due date, for example, due to a federally declared disaster.
Use code Q for a distribution from a Roth IRA if you know that the participant meets the 5-year holding period and:
- The participant has reached age 59½,
- The participant died, or
- The participant is disabled.
Note: If any other code, such as 8 or P, applies, use code J.
Used with: None (the table lists no second code)
Use code R for a recharacterization of an IRA contribution made for 2025 and recharacterized in 2026 to another type of IRA by a trustee-to-trustee transfer or with the same trustee.
Note: A participant is allowed to recharacterize an IRA contribution made for a prior year when the IRS provides tax relief by postponing the tax filing due date, for example, due to a federally declared disaster.
Used with: None (the table lists no second code)
Use code S only if the distribution is from a SIMPLE IRA in the first 2 years, the employee/taxpayer has not reached age 59½, and none of the exceptions under section 72(t) are known to apply when the distribution is made.
The 2-year period begins on the day contributions are first deposited in the individual's SIMPLE IRA. Do not use code S if code 3 or 4 applies.
Used with: J
Use code T for a distribution from a Roth IRA if you do not know if the 5-year holding period has been met but:
- The participant has reached age 59½,
- The participant died, or
- The participant is disabled.
Note: If any other code, such as 8 or P, applies, use code J.
Used with: None (the table lists no second code)
Use code U for a distribution of dividends from an employee stock ownership plan (ESOP) under section 404(k). These are not eligible rollover distributions.
Note: Do not report dividends paid by the corporation directly to plan participants or their beneficiaries. Continue to report those dividends on Form 1099-DIV.
Used with: B
Use code W for charges or payments for purchasing qualified long-term care insurance contracts under combined arrangements that are excludable under section 72(e)(11) against the cash value of an annuity contract or the cash surrender value of a life insurance contract.
Used with: 6
Use code Y for a distribution made directly from an IRA to a charitable organization and that the taxpayer intends to treat as a QCD. For more information about QCDs, see Pub. 590-B.
Note: When using code Y, you must use either code 4, 7, or K. See Qualified charitable distributions (QCDs), earlier.
Note: For tax year 2026, using code Y is optional. You may choose, but are not required, to use code Y.
Combinations allowed for tax year 2026
Table 1 has a column headed “Used with code (if applicable)”. The checker at the top of this page reads that column: pick two codes and it says whether the instructions list the pairing, and whether IRIS accepts it. Table 1 lists every pairing under both codes.
The allowed combinations are fixed for each tax year. For e-filed returns the list is in the IRIS schema itself: for tax year 2026 the box 7a field (Form1099RDistributionCd) accepts exactly 120 values, which are 29 single codes and 91 two-code pairs. Anything else fails schema validation. Three things follow from the list:
- It matches Table 1. Every pair the schema accepts is a pairing in the “Used with” column of the 2026 instructions, and every pairing in that column is in the schema.
- Either order is accepted, for example 1B or B1 and 4G or G4, with one exception.
- Code Y is never accepted alone and must come first: the only values are Y4, Y7 and YK.
| First code | Values the tax year 2026 schema accepts |
|---|---|
| 1 | 1, 18, 1B, 1D, 1K, 1L, 1M, 1P |
| 2 | 2, 28, 2B, 2D, 2K, 2L, 2M, 2P |
| 3 | 3, 3D |
| 4 | 4, 48, 4A, 4B, 4D, 4G, 4H, 4K, 4L, 4M, 4P |
| 5 | 5 |
| 6 | 6, 6W |
| 7 | 7, 7A, 7B, 7D, 7K, 7L, 7M |
| 8 | 8, 81, 82, 84, 8B, 8J, 8K |
| 9 | 9 |
| A | A, A4, A7 |
| B | B, B1, B2, B4, B7, B8, BG, BL, BM, BP, BU |
| C | C, CD |
| D | D, D1, D2, D3, D4, D7, DC |
| E | E |
| F | F |
| G | G, G4, GB, GK |
| H | H, H4 |
| J | J, J8, JP, JS |
| K | K, K1, K2, K4, K7, K8, KG |
| L | L, L1, L2, L4, L7, LB |
| M | M, M1, M2, M4, M7, MB |
| N | N |
| P | P, P1, P2, P4, PB, PJ |
| Q | Q |
| R | R |
| S | S, SJ |
| T | T |
| U | U, UB |
| W | W, W6 |
| Y | Y4, Y7, YK |
The list changes when the IRS adds or retires a code, so check the schema and instructions for the year you are filing. See the IRIS Form 1099-R page for the rest of the record.
Where box 7 sits on the form
On the 2026 Form 1099-R, box 7 is split into four parts: 7a for the distribution code or codes, 7b for the IRA/SEP/SIMPLE checkbox, 7c for the Trump account checkbox and 7d for earnings on excess contributions. The instructions for box 7a start: “Enter the appropriate code(s) in box 7a.” They also say why accuracy matters: “Read the codes carefully and enter them accurately because the IRS uses the codes to help determine whether the recipient has properly reported the distribution.”
If you file through IRIS, see the Form 1099-R IRIS page for how the form is entered there.
The IRA/SEP/SIMPLE checkbox (box 7b)
The code says what kind of distribution it was. Box 7b says what kind of account it came from. The rule: “Enter an "X" in the IRA/SEP/SIMPLE checkbox if the distribution is from a traditional IRA or Roth SIMPLE IRA.” The instructions go on to say not to check the box for a distribution from a Trump account, from a Roth IRA that is not a Roth SIMPLE IRA, or for an IRA recharacterization.
One special case: employer matching and nonelective contributions made to a Roth SEP or Roth SIMPLE IRA are reported with code 2 or 7 in box 7a and box 7b checked.
When two codes apply
The limit is two: “Enter a maximum of two alphanumeric codes in box 7a.” The instructions add: “When applicable, enter a numeric and an alpha code.” Their examples are codes 7 and A for a normal distribution from a qualified plan that qualifies for the 10-year tax option, and codes 4 and G for a direct rollover for a surviving spouse or a nonspouse designated beneficiary (4 and H if it goes from a designated Roth account to a Roth IRA).
| Situation | What the 2026 instructions say |
|---|---|
| Two numeric codes | “Only three numeric combinations are permitted on one Form 1099-R: codes 8 and 1, 8 and 2, or 8 and 4.” |
| Two codes that the table does not pair | “If two or more distribution codes are not valid combinations, you must file more than one Form 1099-R.” |
| Part of a distribution is early and part is not | File one Form 1099-R for the part that takes code 1 and another for the part that takes code 7. |
| Part is a direct rollover and part is not | “you must file a separate Form 1099-R for each part showing the appropriate code on each form.” |
| Excess deferrals taxable in two different years | File separate Forms 1099-R, using code 8 or P to show the year the amount is taxable. |
| Code M or L with code B, and a numeric code is also needed | If a numeric code is needed to show whether the recipient is subject to the 10% tax under section 72(t), omit code M or L, as applicable. |
| A qualified charitable distribution | “When reporting a QCD, you must use code Y first with either code 4, 7, or K.” For tax year 2026, using code Y is optional. |
Withholding, Form 945 and backup withholding
The code does not change where withholding is reported. Federal income tax withheld goes in box 4 of the 1099-R, and the instructions for that box say: “This withholding under section 3405 is subject to deposit rules, and the withholding tax return is Form 945.” The next sentence is: “Backup withholding does not apply.” For a payee who fails to furnish a correct TIN, those instructions give their own withholding rule under the heading “Failure to provide TIN”.
The instructions also require the payer to file Form 1099-R under the same name and EIN used to deposit the tax and to file Form 945. To compare the box 4 totals on your 1099-Rs with Form 945 before you file, use the Form 945 vs 1099-R and W-2G checker.
Questions people ask
What does code 7 in box 7 of a 1099-R mean?
Normal distribution. The instructions use it for a normal distribution from a plan when the employee or taxpayer is at least age 59½, and say: “Generally, use code 7 if no other code applies.” They also say not to use code 7 for a Roth IRA.
What does code G mean on a 1099-R?
Direct rollover and direct payment. Use it for a direct rollover from a qualified plan, a section 403(b) plan or a governmental section 457(b) plan to an eligible retirement plan. For a direct rollover from a designated Roth account to a Roth IRA, the table says to use code H instead.
What is the difference between code 1 and code 2?
Both are for a participant who has not reached age 59½. Code 1 is an early distribution with no known exception. Code 2 is an early distribution where you know one of the listed exceptions applies, such as a Roth IRA conversion or an IRS levy.
How many distribution codes can go in box 7a?
Two at most, and only a pairing that Table 1 lists. If the codes that apply are not a listed pair, file more than one Form 1099-R.
Which code is used for a death distribution?
Code 4, regardless of the participant’s age, for a payment to a decedent’s beneficiary, including an estate or trust. Table 1 lists it as usable with 8, A, B, D, G, H, K, L, M, P or Y.
Is code Y required for a qualified charitable distribution in 2026?
No. The table says: “For tax year 2026, using code Y is optional.” If you do use it, it goes first, with code 4, 7 or K.